Home Contact Us
We never forget you have a choice
                             and
strive hard to be that choice for ever !!
 

Products

  CEMENT FIBER BOARDS

Cement board is a combination of cement and reinforcing fibers. Cement boards are fire-proof, water-resistant and anti-termite. These characteristics enable the boards to be the prime panels for portable cabin industry. In our part of the world, this is used for wall paneling and flooring in the prefabricated houses and similar structures. Cement boards can also be used for kitchen cabinets since due to resistance characteristics. Easy to cut, grind, screw and paint.

The available sizes

Thickness:

1200 x 2400 mm and 1220 x 2440 mm (4'x8').

06 mm, 09 mm, 12 mm and 18 mm.
Other thicker boards can be had on bulk quantity request.

 

  MAGNESIUM OXIDE BOARDS

Magnesium Oxide Board or MgO Board is a technologically advanced building material that offers superior performance in every category when compared to traditional wood, gypsum and cement based products. This board is virtually impervious to fire, water, insects; does not feed mold or mildew; is non-toxic, non- flammable and non-combustible; is durable, maintains it’s dimensional stability – even when wet; and, has exceptional bonding surface. MgO Board is a mineral based green builder product. It is homogeneous and non de-laminating.

The available sizes
Thickness:

1200 x 2400 mm and 1220 x 2440 mm (4'x8').
06 mm, 09 mm, 12 mm and 18 mm.
Other thicker boards can be had on bulk quantity request.

 

  CALCIUM SILICATE BOARDS

Calcium Silicate Board is made from siliceous and calcareous materials reinforced with fibres. These boards are made in a laminar process and then autoclaved to give a stable crystalline structure. This is lightweight and non-combustible with high performance, durability and architectural flexibility, providing customers with exceptional value for money. Calcium silicate boards are widely used in the manufacture of portable cabins, wall panelings, plain ceilings, decorative ceiling systems and in many more similar applications. These boards are water proof and anti-termite as well.

The available sizes
Thickness:

1200 x 2400 mm and 1220 x 2440 mm (4'x8').
06 mm, 09 mm, 12 mm and 18 mm.
Other thicker boards can be had on bulk quantity request.

 

  GYPSUM BOARDS

Gypsum Boards (also known as plasterboard, wallboard, dry-wall partition) is a panel made of gypsum plaster pressed between two thick sheets of paper. It is used to make interior walls and ceilings. Drywall construction became prevalent as a speedier alternative to traditional materials and systems. These boards are easy to cut, shape and drill. This is paintable. Tiles could be stuck on these boards easily. Gypsum boards are manufactured in fire-proof and water-proof catagories as well. This is widely used in partitions, ceilings and many other similar jobs.

Available in 1220 x 2440 mm and 1200 x 2400 mm with thickness like 9.5mm, 12mm and 15 mm

  FIBER GLASS INSULATION SYSTEMS

FG insulation material maintains its insulating efficiency and reliability over time and does not absorb moisture - thereby resisting any permanent loss of insulation value. Fiber glass insulation will not settle or deteriorate, thus ensuring that the insulating value is maintained, when properly installed. The insulating materials in fiberglass insulation are noncombustible. Its natural fire resistance is unaffected by moisture, evaporation, or time, which makes it a very reliable product. FG insulation is available in roll and slab form for use in a wide range of exterior wall and roof/ceiling applications. It can be installed in wood or metal framing cavities.

Available dimensions:

1.20 M x 20 M x   50 mm x 12-15 KG per M3.
1.20 M x 10 M x 100 mm x 12-15 KG per M3.
(With aluminum foil backing and plain)

 

  CEILING TILES ( GYPSUM & ALUMINIUM)

We do stock Gypsum ceiling tiles (600 x 600 mm) with Aluminium foil back and vinyl faced. Various exotic designs are available in this product with or without the suspension system. Gypsum ceiling tiles are lightweight, easy to install and remove, fire rated and preventive to water from top and bottom.

Aluminium ceiling tiles (600 x 600 mm) are also available in different surface designs. Its aesthetic look, resistance to water and fire-rating makes it one of the most sought-after ceiling products in the market. This product also is available with or without suspension system.

  STUDS & TRACKS

Studs and tracks are framing components that provide consistent dimensions resulting in straighter and stronger walls and floors. Superior strength allows for longer floor spans and taller walls. These are noncombustible, water-proof and anti termite. Light gauge steel is easy to use, and offers pre-punched utility holes to easily permit installation of pipe and conduit. Steel is comparably light weight to other products, reducing handling cost and labor fatigue. Available in different width, thickness and gauge.

Custom sizes can also be manufactured should there be big quantity.

  ACOUSTIC (CEILING) SUSPENSION SYSTEMS

We stock a broad range of high quality acoustic suspension systems that perform better, carry increased ceiling load, and reduce installation time. With a wide variety of ceiling suspension systems available for your most challenging installations, we are sure to have the right system for your project.

We stock:
Consisting:
ARMSTRONG, CMC, USG, HADLEY and STEELGRID  Brands.
Main Runner, Cross Tee Long (1200 mm), Cross Tee Short (600 mm) and Wall Angles                

 

  METAL ROOFING TILES

"Goodmann" metal roofing tiles are made of galvonized iron with a natural stone structure and strong stereoscopic appearance. It is available with a veriety of types and colors that provide excellent landscaping for buildings and portable cabins.

The life span of these tiles are longer, It is light weight, energy saving and protects the environment. Easy to bent, cut and dent. The GI base is protected with 08 different layers to create its appearance and workability to the maximum. And it is weather-proof as well !!

Size: 1170 x 380 mm.  Covering Area: 0.45 M2. Weight per tile: 2.50 KG. 

 

 

 
 
  COMMERCIAL PLYWOOD

We stock furniture grade plywood and the general purpose boards. Commercial Plywood is generally supplied in BB/CC grade. This is available in 100 % hardwood core, combination (combi) core with hard wood and soft wood layers mixed in a proportion and fully soft wood core as well. Internal grade glue is used for the manufacture of commercial plywood.

sizes: 4 x 8' x 3.6 mm/ 5.2 mm / 09 mm / 12 mm / 15 mm / 18 mm / 22 mm / 25 mm.
Origin: Indonesia (Korindo), Malaysia ( Jaya brand), India ( assorted brands) and China (Sindoply)                

  FILM FACED PLYWOOD

This product is widely used in building construction, kitchen Caracas and all those furniture jobs where water penetration is to be prevented. This is manufactured with external grade glue and both the surfaces will be coated with brown colored, water-resistant phenolic film.

Sizes:
Origin:
4' x 8' x 12 mm and 18 mm.
Indonesia (Korinmplex), Malaysia and China (Both various brands)                

 

  WBP PLYWOOD

WBP Ply is a code in form of letters for exterior grade plywood. WBP means Weather and Boil Proof. WBP plywood can be used for fine quality furniture manufacturing, for any similar internal water resistant applications and for external use as well. Water-resistant glue is used when manufacturing WBP therefore it can resist a certain amount of moisture.

Sizes:
Origin:
4' x 8'x 3.6 mm, 5.2 mm, 09 mm, 12 mm and 18 mm.
Indonesia (Korindo), Malaysia and China ( various brands) 

 

  MDF BOARDS

Medium Density Fiber Boards are generally denser than plywood. It is made up of separated fibers but can be used as a building material similar in application to commercial plywood. It is denser and more stronger than Chip Boards. MDF Boards are widely used in furniture manufacturing because of the easiness to work with and its smooth surface finish.

Sizes:

Origin:
4' x 8' x 03 mm / 04 mm / 06 mm / 09 mm / 12 mm / 15 mm / 18 mm / 22 mm / 25 mm / 32 mm.
Indonesia (Korindo), Malaysia and China ( various brands).
Water Proof / resistant and Fire Proof/Resistant MDF Boards are also available in certain thickness

 

  MELAMINE MDF BOARDS

This quality of MDF Boards are overlaid with low-pressure melamine faced paper-like material that provides a pre-finished hard surface that is ready to cut and install, easy to maintain and resistant to normal stains and scratch.

Sizes:

Shades:
4' x 8' x 09 mm, 12 mm and 18 mm.
Both sides melamine finished and one side melamine finished.
White / Beech / Oak / Teak / Cherry / Ash / Pine / Mahogany. Also available in a number of other wood finish and pastel colors.                

 

  TEAK WOOD

Teak is a yellowish brown timber with good grain and texture. Teak is often an effective material for the construction of both indoor and outdoor structures. It is used in the manufacture of outdoor furniture, boat decks, and other articles where weather resistance is desired. It is also used for indoor flooring, countertops and as a veneer for indoor furnishings. Teak is used extensively to make doors and window frames, furniture, and columns and beams in houses and country craft building. It is very resistant to termite attacks.

Teakwood is available in planks  with thickness of  1", 2", 3" etc with required width as well as custom-cut logs/planks.

  RED MERANTI WOOD

Red Meranti is a tropical rain forest species from SE Asia and Pacific Islands.. The timber can be painted, stained, or polished. This species also machines well to a smooth surface and takes standard fittings and fastenings easily. Red Meranti is commonly used for decorative applications including paneling, flooring, joinery, moldings and plywood. It is regularly sought after for furniture and carving as well. Available in Air dried condition but could be Kiln Dried on request.

Standared Sizes: 2", 3" and 4" thickness. 6", 8", 9", 10" and 12" width with various length from 8' to 22'.

 

  BEECH WOOD

Beech wood is used in the making of solid and laminated flooring, furniture, decorative veneers, musical instruments, cabinet, brush backs, wooden spoons and handrail parts. It works best with hand and power tools and has good nailing and gluing properties. Even though a hardwood, it is easy for cutting, shaping, nailing, drilling and polishing. Beechwood is available in Air Dried (AD) and Kiln Dried (KD) qualitie
 

We do stock European Beechwood with sizes varying from 50mm, 75mm and 100 mm in thickness with assorted width & length.

  AFRICAN HARDWOODS CUSTOM-CUT HARDWOOD& SOFT WOOD

We supply custom-cut hard wood and soft wood to comply with your specifications. This is especially useful for decking, stacking, hand-railing and much similar applications in oilfield and ship-building industries. We have many satisfied clients in these fields to which we cater their required sizes within the limited span of time that they demand.

Timber species offered: RADIATA PINE, BILINGA, IROKO, DABEMA and a variety of AFRICAN HARDWOODS

 

  CANADIAN S4S LUMBER

This is a treated Canadian pine wood with various thickness, width and length. S4S stands for " surfaced four sides". This lumber is Kiln dried, smooth-surfaced and ready to use for various requirement sin portable cabins, offices, partitions, wall paneling, ceiling and reinforcements in panel doors.

Available in 4", 6", 8", and 10" width with assorted length. The standard thickness is 2" .The actual thickness and width shall be less by 1/2" because of surfacing/smoothing.

  WHITE WOOD ( RADIATA PINE WOOD)

Common white wood is suitable for a wide variety of uses. It holds screws and nails well and takes paint and stain without difficulty - and modern kiln dried timber is very easy to work. It is brittle when bent, so does not have the same load bearing features as hard wood. Radiata pine wood is used in house construction as weatherboards, posts, beams or plywood, in fencing, retaining walls, for concrete form work.

Sizes: This is available in all the standard thickness and width. Standard length is 4000 mm.

 

  WOOD VENEERS

Furniture made with wood veneer uses less wood than the same piece of furniture made with solid wood. Some projects built using wood veneer would not be possible to construct using solid lumber, owing to expansion and contraction caused by fluctuation of temperature and humidity. Veneers are much useful in the decorative and laminating industry.

Available teak, oak, mahogany, beech, cherry and a lot more. Also available are Artificial Veneers in a wide range of shades and designs

  METAL CORRUGATED SHEETS

We stock GI Corrugated sheets and Aluminium Corrugated & profiled sheets. These are available in lengths of 8', 10'and 12''. The width shall be a standard 32" and thickness varies from 22 G to 34 G. Profiled Aluminum Sheets are available in length up to 40' with various thickness.

  ROCK WOOL INSULATIONS

Rockwool is made from a special grade of rocks named BASALT. Rock wool is called in the names of stone wool insulation, mineral wool insulation, or slag wool insulation. Rock wool has a wide range of insulation applications due to its excellent ability to block sound, thermal and fire. Rock wool is light in weight , strong , re-silent, easy to handle and cut to suit intricate shapes. Rockwool insulation is commonly used as an insulation in the construction industry, oil and gas, refineries and other processing industries where fire safety is a concern. Due to its excellent acoustic properties, it is widely used as an acoustic insulation in residential and commercial buildings as well as industrial applications.

Available in the sizes : 500 x 1000 x 50 mm x 30 KG/M3. Other densities could be supplied on special order with bulk quantity.

 

  ACRYLIC SHEETS

Plastic Acrylic Sheets which is widely known as Plexiglass is widely used in signboard industry and partition jobs. Many shades and colors are available in this product with opaque, translucent and transparent appearances. 

Available in the sizes :

4' x 6' and 4'x 8'. Thickness varies from 02 mm to 25 mm.
We also stock ACRYLIC MIRROR and POLYCARBONATE SHEETS as well in various thickness and dimensions. 

 

  MAT FLOORINGS (PVC)

PVC flooring rolls are widely used for the floors in portable cabins, offices, residential units and many more. This is available in plain shades and wood finishes in a semi-matt/semi-glossy format. This is a three-layer product which has excellent resistance to tear & wear. It is 100 % waterproof as well.

Available in the sizes :
Shades:

1.50 M x 20 M x 1.5 mm & 2mm. 2 M x 15 M x 1.5 mm & 2 mm.
Beech/Teak/mahogany/Cherry/Rosewood etc. Plain colors like Beige, White, L.Green and L. Blue are also available.

 

Products List

Who we are

BAATCO is growing. The 2020 World Expo will be another glowing opportunity for growth. Dubai in particular and the UAE in general are about to witness a great leap forward during the forthcoming years. It is high time for Dubai to emerge as " the center of the world", once again! We understand that each enterprise based here has to play an important role in the infra-structural expansion of the nation. It is a win-win situation!!

Our Location

BURJ AL AAJ BUILDING MATERIALS CO (LLC),
Tel: +9714 3408824, 3408829, Fax: +9714 3408823,
P.O. Box: 102880, Dubai - U.A.E. Mob: +971 50 655 4352
E-mail: baatcotrade@gmail.com. Website: www.baatco.com

Designed By Levos © 2013 Burj Al Aaj. All rights reserved